Model: DHSSS
Description
DuraSeal Heat Shrink Solder Splices is One piece design，it consists of transparent heat shrinkable sleeve and fluxed solder. Provides insulation easily and lower the installed cost. Color hot-melt glue on two ends of heat shrinkable tube，it’s very convenience to use the exact wire dimension.
Features:
>Shrinking ratio 2:1
>Waterproof for wiring splices
>Transparent sleeve provides precise inspection
> High Tensile Strength
>Easy control soldering process
Operating Temperature Range:
>Operating Temperature : -55˚C~125˚C
>Fully Recovery Temperature : 130˚C
>Temperature of fully solder melt : 150˚C
PROPERTY
|
Item |
Value |
|
Temperature Application Range |
-55˚C~125˚C (Butt Joint) |
|
Shrinking Temperature |
>115℃ |
|
Dielectric strength |
1KV |
|
Protection Type |
IP 67 |
Specification
|
Model |
Color |
Before Shrinking(mm) |
After Shrinking(mm) |
Solder Ring |
Length (L) |
||||
|
ID (a) |
Thick (b) |
ID |
Thick |
ID (c) |
Thickness (d) |
Length (e) |
|||
|
DHSSS-1 |
Clear |
2.0±0.1 |
0.30±0.05 |
1.1±0.1 |
0.50±0.05 |
1.8±0.1 |
0.3±0.05 |
2.0±0.1 |
40±0.5 |
|
DHSSS -2 |
Red |
3.2±0.2 |
0.38±0.05 |
1.5±0.1 |
0.55±0.05 |
2.9±0.1 |
0.45±0.05 |
2.5±0.1 |
40±0.5 |
|
DHSSS -3 |
Blue |
5.0±0.2 |
0.40±0.05 |
2.6±0.1 |
0.78±0.05 |
4.6±0.1 |
0.48±0.05 |
2.5±0.1 |
40±0.5 |
|
DHSSS -4 |
Yellow |
6.5±0.2 |
0.40±0.05 |
3.0±0.1 |
0.80±0.05 |
6.2±0.1 |
0.5±0.05 |
3.5±0.1 |
40±0.5 |
Leave A Comment